20x10

icon1785 · Apr 22, 2012

Anyone running a 10 inch wide rim with spindles? How hard would this be to accomplish, running a 20x10 with -14 offset on a 6 inch lift with cst Spindles and 5100's

Sent from my HERO200 using AutoGuide.com App

Jesco · Apr 22, 2012

What size tires? That's gonna stick wayyy out past the fenders

icon1785 · Apr 22, 2012

295/60/r20 or stick with 305/55/r20

icon1785 · Apr 22, 2012

ALso found a 275/65/r20 wild peak that says it will fit on a 20x10

Jesco · Apr 22, 2012

35's are gonna rub on a 6" like Sam's did. It can be done though.

Jesco · Apr 22, 2012

Those wheels would be sticking out about an inch further than the cranks

icon1785 · Apr 22, 2012

What do you think about the 34 or 33 inch tire rubbing

gpend5.7sport · Apr 22, 2012

33 on 6" is gonna look strange, go with 34's atleast.

icon1785 · Apr 22, 2012

You would be surprised, Sam showed me some pics and its not to bad looking and he was at 6.5 when he took the pics

icon1785 · Apr 23, 2012

Thanks for all ur input, anyone else ganna chime in?

Sent from my HERO200 using AutoGuide.com App

txbest · Apr 25, 2012

I run a 35x12.50x20 nitto mud grapler on a 20x10 -35 offset they do stick out far little rub but i have a bds 7 inch

EUPHOR1C · Apr 25, 2012

Txbest, do you have pics? I'm curious to see what that offset looks like on a 7 inch lift.

txbest · Apr 25, 2012

hmm other one didnt post

Yeah they stick out far want to get rid of them so i can get a diff setup

Coachbuilder1 · Apr 25, 2012

I'm running a 20x10 -19 offset and they stick out 3+ inches. The wheels with larger offsets require allot more lift to clear because of the increased turning radius. Glad to see you started this thread Icon1785. It helps seeing actual pics from everyone

I'm running a Trail Grappler 35"x12.50"x20" and had to remove 2.5" from the lower edge of the bumper.
Nothing near the body mount because of my offset. The Bushwacker pocket flares help but still don't cover the entire tire.

Jesco · Apr 25, 2012

Bamf right there

txbest · Apr 27, 2012

yeah im not hitting front bumper because i have an after market one my issue comes with the body mount gonna throw 38's on it but gonna do some cutting

Bobby B · Apr 27, 2012

I'm thinking about 20X10's and basically have the same lift as coach's, but I think I will go with the -12 offset
good thread BTW

phiezZy · May 22, 2012

Good thread! im waiting on fuel hostage 20x10-24 with 35's. gonna be fun to fit those, coachs tundra is deffinatly big inspiration to how im building my truck

skidmarkz · Jul 30, 2012

I'm goin the same route as bobby b or that's what I want to do. I just ordered the CST 5.5 and I want the 20x10 XD MONSTERS 778 and they have a -12 offset. I want to put 35" toyo m/t on also. Will they fit and if they do how far will they stick out. I don't really care about the trimming. That just comes with the territory.

Camberg coil overs and control arms soon to come

FYI- if anyone needs anything from camberg let me know. I get 15% off. They are about 2 blocks from my pad and I'm always over there

nick123 · Jan 23, 2013

I am planning to get BDS 7" lift with 20x10 and -12 offset and 35" tires. will i need to modify the bodymount? how much trimmings do i need to do to the fender? and how far would the tires stick pass the original fender flare? opinions and pics are greatly appreciated....

Bobby B · Jan 23, 2013

I went with the 20X12 Fuel Hostage and with the CST spindles they stick out ridiculously far! But I was able to drive home just fine, but I do need to trim the front bumper.
but 20X10's should be cake with some trimming.

nick123 · Jan 23, 2013

I am curious to see some pictures of wheels with -12 offset to see how far the tires stick out with the oem fender flares. i appreciate your response Bobby. You gave me advices before....

Bobby B · Jan 24, 2013

I;m pretty sure these are 20X10 -12's on a six inch lift

Coachbuilder1 · Jan 24, 2013

Your truck Looks TOUGH Bobby! Love the new wheels

nick123 · Jan 24, 2013

wow....those are nice photos and thank you Bobby. Are those 35" tires and i wonder if they require trimming of the body mount with these wheels (20x10 -12 offset).

20x10

Attachments

Attachments

Top Contributors this Month

Recommended Communities