Toyota Tundra Discussion Forum banner
1 - 20 of 21 Posts

AZTUNDRA25

· Registered
Joined
·
560 Posts
Discussion starter · #1 ·
Discussion starter · #4 · (Edited)
its the small gray wire on the flasher relay module, there is also a large gray wire. I think it is pin 26. You will have to take the lower part of dash off to get to it.
So do I need to remove both wires or they both leading to Pin 26? Will this disable the DRL? Can't I access replay module from the engine bay?
 
Did this work for you? And do your drls still function as signal/hazard lights?


Cool. I'll give it a try and see if that works!

Thanks for the assistance.
 
I just did this on my new 2015 so I can confirm it still works.

This picture is from elsewhere.

Image


J29. Clip the SMALL Gray wire. NOT the large one in the picture. There is another one half it's size at position #5 that you cannot see in the picture hidden behind but it is there. Also gray.

Everything else works except the DRL are now gone. YAY! :)
 
I just did this on my new 2015 so I can confirm it still works.



This picture is from elsewhere.



Image




J29. Clip the SMALL Gray wire. NOT the large one in the picture. There is another one half it's size at position #5 that you cannot see in the picture hidden behind but it is there. Also gray.



Everything else works except the DRL are now gone. YAY! :)

Just cut the small grey wire on 2014 tundra and my DRL are still on .WTF?

Anyone has a solution?


Sent from AutoGuide.com Free App
 
Discussion starter · #15 ·
You sure you clipped the right Grey wire? There are two different Grey wires! You may also need to remove the following purple wire from the bulb harness itself, I did this as well. Did you try releasing your parking brake to see if they turn off?

http://www.tundratalk.net/forums/tu.../tundra-lighting-electrical/96361-eliminate-drl-amber-light-mod.html#post574314

Yeah I cut the skinny grey wire not the fat one,and also tried releasing parking brake...same


Sent from AutoGuide.com Free App
 
Discussion starter · #17 ·
Try removing that Purple wire in the bulb harness that I posted the link and see if that does anything, you can also plug it back in.

Mine is currently removed, so not sure if that's causing them to stay on..
 
Try removing that Purple wire in the bulb harness that I posted the link and see if that does anything, you can also plug it back in.



Mine is currently removed, so not sure if that's causing them to stay on..

Solved,! After removing the purple wire in the harness ,DRLs are gone.
Thank you for your help AZTUNDRA


Sent from AutoGuide.com Free App
 
I just did this on my new 2015 so I can confirm it still works.

This picture is from elsewhere.

Image


J29. Clip the SMALL Gray wire. NOT the large one in the picture. There is another one half it's size at position #5 that you cannot see in the picture hidden behind but it is there. Also gray.

Everything else works except the DRL are now gone. YAY! :)
Thanks for the info on this I need to do this also so I can install a set of Platinum headlights I bought.
My question is to anyone is how would I wire the LED DRL's on the platinum lights.
 
Thanks for the info on this I need to do this also so I can install a set of Platinum headlights I bought.
My question is to anyone is how would I wire the LED DRL's on the platinum lights.
there are 3 wires for the led orange, red, and black. one for park light one for ground and one for drl.
 
  • Like
Reactions: jtgarr
1 - 20 of 21 Posts